Vivado Error [Opt 31-67], and How I Fixed It.

So I am dealing with the following scenarios: Scenario 1 – Genesys Zynq with SYZYGY SFP I have the Genesys Zynq UltraScale+ MPSoC 3EG board that does not provide direct access to the PHY pins, but has a SYZYGY port that I have plugged in to the SZG-DUALSFP module with an SFP connector. Scenario 2 … Read more

Plans Using Arty Artix-7

Here is the new plan: Step 1 – Create a design using a MicroBlaze processing system, enable a UART connection and listen on an AXI FIFO and dump packets to the screen as they are received in chunks of X bytes. Step 2 – Insert some LabVIEW FPGA code to send one packet of data … Read more

And Another Alternative

I no longer have to look into figuring out how to code up or wire up the SZG-DUALSFP daughter board to the Digilent Genesys Zynq UltraScale MPSoC+ board. Why? Because I have a really old board that cost only $99 dollars that gives me direct access to the pins of an old 10/100 MBit PHY! … Read more

Rebuilding Genesys Zynq UltraScale MPSoC+ Out of Box Demo

So I spent some time to rebuild the out-of-box demo for the Genesys Zynq UltraScale MPSoC+ board.  Not everything worked for me right away, so I made this post to include all the things I did to get it to work.: My system: Windows 10 Windows Subsystem for Linux 2 Ubuntu 18.04 (<= Ubuntu 20 … Read more